Multi-Tech MultiModem EDGE Reference Manual page 30

^SCFG: "Serial/DDD" , (list of supported <deviceDescr>s) , (list of supported <descrIndex>s) ,
(max. string length of <langId>) , (max. string length of <vendorId>) , (max. string length of
<productId>) , (max. string length of <manufacturer>) , (max. string length of <product>) , (max. string
length of <serialNo>)
^SCFG: "TCP/BufSize", (list of supported <tcpBufSize>)
^SCFG: "TCP/IRT", (list of supported <tcpIrt>)
^SCFG: "TCP/MR", (list of supported <tcpMr>)
^SCFG: "TCP/OT", (list of supported <tcpOt>)
^SCFG: "TCP/Sack", (list of supported <tcpSack>)
^SCFG: "TCP/TTcp", (list of supported <tcpTtcp>)
^SCFG: "TCP/WithURCs", (list of supported <tcpWithUrc>)
^SCFG: "URC/CallStatus/CIEV", (list of supported <succ>s)
^SCFG: "URC/CallStatus/SLCC", (list of supported <sucs>s)
^SCFG: "URC/Datamode/Ringline", (list of supported <udri>s)
^SCFG: "URC/Ringline", (list of supported <uri>s)
^SCFG: "URC/Ringline/ActiveTime", (list of supported <urat>s)
OK
AT^SCFG?
Read Command Syntax:
Read Responses:
^SCFG: "CALL/ECC", <ecc>
^SCFG: "GPRS/ATS0/withAttach", <gs0aa>
^SCFG: "GPRS/AutoAttach", <gaa>
^SCFG: "GPRS/PersistentContexts", <gpc>
^SCFG: "GPRS/RingOnIncomingData", <groid>
^SCFG: "MEopMode/Airplane", (<map>)
^SCFG: "MEopMode/Airplane/OnStart", <mapos>
^SCFG: "PowerSaver/Mode9/Timeout", <psm9to>
^SCFG: "Radio/Band", <rbc>, <rba>
^SCFG: "Radio/CNS", <cns>
^SCFG: "Radio/FirstScan", <firstscan>
^SCFG: "Radio/OutputPowerReduction", <ropr>
^SCFG: "Serial/DDD" , <deviceDescr>, <descrIndex>, <langId>, <vendorId>, <productId>,
<manufacturer>, <product>, <serialNo>
^SCFG: "TCP/BufSize", <tcpBufSize>
^SCFG: "TCP/IRT", <tcpIrt>
^SCFG: "TCP/MR", <tcpMr>
^SCFG: "TCP/OT", <tcpOt>
^SCFG: "TCP/SAck", <tcpSack>
^SCFG: "TCP/TTcp", <tcpTtcp>
^SCFG: "TCP/WithURCs", <tcpWithUrc>
^SCFG: "URC/CallStatus/CIEV", <succ>
^SCFG: "URC/CallStatus/SLCC", <sucs>
^SCFG: "URC/Datamode/Ringline", <udri>
^SCFG: "URC/Ringline", <uri>
^SCFG: "URC/Ringline/ActiveTime", <urat
OK
Write Command for Query/Configure Emergency Numbers for SIM without ECC Field
AT^SCFG="Call/ECC"[, <ecc>]
Write Responses:
^SCFG: "Call/ECC", <ecc>
OK
ERROR
+CME ERROR
Write Command for GPRS ATS0 with Automatic Attach:
AT^SCFG="GPRS/ATS0/withAttach"[, <gs0aa>]
Write Responses:
^SCFG: "GPRS/ATS0/withAttach", <gs0aa>
OK
ERROR
+CME ERROR
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
>
Chapter 2 – Configuration Commands
30