Multi-Tech MultiModem EDGE Reference Manual page 33

Write Command for Configuration of Internet Service URCs:
AT^SCFG="Tcp/WithURCs"[, <tcpWithUrc>]
Write Responses:
^SCFG: "Tcp/WithURCs", <tcpWithUrc>
OK
ERROR
+CME ERROR
Write Command for Configuration of URC "+CIEV: call" Call Status Indication:
AT^SCFG="URC/CallStatus/CIEV"[, <succ>]
Write Responses:
^SCFG: "URC/CallStatus/CIEV", <succ>
OK
ERROR
+CME ERROR
Write Command for Configuration of URC "^SLCC" Call Status Indication:
AT^SCFG="URC/CallStatus/SLCC"[, <sucs>]
Write Responses:
^SCFG: "URC/CallStatus/SLCC", <sucs>
OK
ERROR
+CME ERROR
Write Command for URC Indication in Datamode via Ring Line:
AT^SCFG="URC/Datamode/Ringline"[, <udri>]
Write Responses:
^SCFG: "URC/Datamode/Ringline", <udri>
OK
ERROR
+CME ERROR
Write Command for URC Indication via Ring Line:
AT^SCFG="URC/Ringline"[, <uri>]
Write Responses:
^SCFG: "URC/Ringline", <uri>
OK
ERROR
+CME ERROR
Write Command for Duration of Active RING Line for URC Indications:
AT^SCFG="URC/Ringline/ActiveTime"[, <urat>]
Write Responses:
^SCFG: "URC/Ringline/ActiveTime", <urat>
OK
ERROR
+CME ERROR
Unsolicited Result Code
^SYSSTART AIRPLANE MODE
This URC is issued each time the Airplane mode is activated, no matter whether Airplane mode is set with parameter
<map>="on" or <mapos>="on". The URC notifies the user that only the AT commands supported in Airplane mode
are accessible. After leaving the Airplane mode the URC "^SYSSTART" indicates that the ME has returned to Normal
mode and the full set of AT commands is accessible again.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Chapter 2 – Configuration Commands
33