At^splr Read Entry From The Preferred Operators List; At^splw Write An Entry To The Preferred Operators List - Multi-Tech MultiModem EDGE Reference Manual

8.17 AT^SPLR Read Entry from the Preferred Operators
List
Description:
Test Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Descriptions:
<index1>
Location number to start reading from
<index2>
Location number where to stop reading
<indexa>
Index range supported by the SIM card (between <index1> and <index2>)
<oper>
Operator in numeric form; GSM location area identification number
8.18 AT^SPLW Write an Entry to the Preferred Operators
List
Description:
Test Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Descriptions:
<index>
location number
<oper>
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
The AT^SPLR write command returns used entries from the SIM list of preferred operators
with <indexa> between <index1> and <index2>. If <index2> is not given, only entry at
<index1> is returned. The test command returns the whole index range supported by the
SIM.
See also AT+CPOL
AT^SPLR=?
^SPLR:(list of supported) <indexa>s
OK
ERROR
+CME ERROR: <err>
AT^SPLR=<index1>[, <index2>]
^SPLR: <index1><oper>
^SPLR: <index2><oper>
OK
ERROR
+CME ERROR: <err>
The AT^SPLW write command writes an entry to the SIM list of preferred operators at
location number <index>.
If <index> is given but <oper> is left out, the entry is deleted. An operator can be only
once in the list. Test command returns the whole index range supported by the SIM.
See also AT+CPOL
AT^SPLW=?
^SPLW:(list of supported) <index>s
OK
ERROR
+CME ERROR:
AT^SPLW=<index>[, <oper>]
OK
ERROR
+CME ERROR: <err>
Chapter 8 – Network Service Commands
116