Cme/Cms Error Code Overview - Multi-Tech MultiModem EDGE Reference Manual

Parameter Description:
<errMode>
0 Disable result code; i.e., only "ERROR" will be displayed. Default.
1 Enable error result code with numeric values.
2 Enable error result code with verbose (string) values.
Example:
To obtain enhanced error messages it is recommended to choose <errMode>=2:
AT+CMEE=2
OK

2.12.1 CME/CMS Error Code Overview

Table 2.4: General "CME ERROR" Codes (GSM 07.07)
<err> Code
0
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
30
31
32
40
41
42
43
44
45
46
47
48
100
132
133
134
256
257
258
259
260
261
262
263
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Text (if AT+CMEE=2)
phone failure
no connection to phone
phone-adapter link reserved
Operation not allowed
Operation not supported
PH-SIM PIN required
PH-FSIM PIN required
PH-FSIM PUK required
SIM not inserted
SIM PIN required
SIM PUK required
SIM failure
SIM busy
SIM wrong
Incorrect password
SIM PIN2 required
SIM PUK2 required
Memory full
Invalid index
not found
Memory failure
text string too long
invalid characters in text string
dial string too long
invalid characters in dial string
no network service
Network timeout
Network not allowed emergency calls only
Network personalization PIN required
Network personalization PUK required
Network subset personalization PIN required
Network subset personalization PUK required
service provider personalization PIN required
service provider personalization PUK required
Corporate personalization PIN required
Corporate personalization PUK required
Master Phone Code required
unknown
service option not supported
requested service option not subscribed
service option temporarily out of order
Operation temporary not allowed
call barred
phone is busy
user abort
invalid dial string
ss not executed
SIM blocked
Invalid Block
Chapter 2 – Configuration Commands
25