Multi-Tech MultiModem EDGE Reference Manual page 139

"alphabet"
"user"
"passwd"
"conId"
"tcpPort"
"address"
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Selects the character set for input/output of string parameters within a profile.
The selected value is bound to the specific profile. This means that different profiles
may use different alphabets. Unlike other parameters, the alphabet can be changed
regardless of whether the <srvParmTag> value "srvType" has been set.
For supported values of <srvParmValue>, refer to <srvParmValuealphabet>.
User name string
1.
Socket
Not applicable.
2.
FTP
Not applicable; set within "address" parameter.
3.
HTTP
Length 2...31
User name for the HTTP authentication mechanism. Currently only HTTP simple
authentication is supported.
4.
SMTP
User name to be used for SMTP authentication (string).
Length: 4...64.
If SMTP authentication is disabled; i.e., "smAuth" flag not set, user name
parameter will be ignored.
5.
POP3
User name identifying a mailbox; i.e., mailbox name (string)
Length: 1...64.
Used to perform authentication with a POP3 server, e.g. "john.smith".
Password string
1.
Socket
Not applicable.
2.
FTP
Not applicable; set within "address" parameter.
3.
HTTP
Password for the HTTP authentication mechanism. Currently HTTP simple
authentication is supported only.
4.
SMTP
Password to be used for SMTP authentication (string).
Length 4...64
If SMTP authentication is disabled; i.e., "smAuth" flag not set; password
parameter will be ignored.
5.
POP3
Server/mailbox-specific password (string).
Length: 1...64.
Used to perform authentication with a POP3 server.
Internet connection profile to be used, for details refer AT^SICS.
TCP Port Number
1.
Socket
Not applicable; set within "address" parameter.
2.
FTP
Not applicable; set within "address" parameter.
3.
HTTP
Not applicable; set within "address" parameter.
If parameter is omitted, the service connects to HTTP default port 80.
4.
SMTP
SMTP server TCP port number (numeric).
16
Length: 0...2 - 1
If this parameter is not set, SMTP default port number 25 is used.
5.
POP3
POP3 server TCP port number (numeric).
16
Length: 0...2 - 1
If this parameter is not set, POP3 default port number 110 is used.
String value, depending on the service type either a URL in the case of Socket, FTP
and HTTP or an address in the case of SMTP and POP3:
1.
Socket
• Socket type TCP client URL
"socktcp://'host':'remote tcpPort'[;disnagle='0|1'] "
"disnagle" is optional for disabling the TCP Nagle algorithm.
0: Nagle algorithm is enabled. Default.
1: Nagle algorithm is disabled.
•
Socket type TCP server URL
"socktcp://listener:'local tcpPort' "
Chapter 10 – Internet Service Commands
139