Settings; Maintenance; Service Information; Disposal - Otto Bock AxonArm Hybrid 12K500 Instructions For Use Manual

Action
off)
Press the button and hold for
more than four seconds.
Open the Axon-Bus gripping
component in an emergency
Press the button and hold for
approximately three
until the Axon-Bus gripping com­
ponent opens.

8 Settings

Adjustments can be made to the AxonArm and the Axon-Bus gripping component via Bluetooth data transfer and
the 560X500=* AxonSoft software. For this purpose, a wireless connection must be established between the
13E500 AxonMaster and the PC with the help of the 60X5 BionicLink PC.
For further functions, please see the instructions for use for the 13E500 AxonMaster and 60X5 BionicLink PC.

9 Maintenance

9.1 Service Information

Since all moving mechanical parts are subject to wear and tear, regular service is required within the guarantee
period. In the course of service, Ottobock Service (Ottobock Myo-Service) checks the entire product. Wear parts
are replaced as required. Omitting a scheduled service inspection voids the guarantee.

10 Disposal

This product may not be disposed of with regular domestic waste in all jurisdictions. Disposal that does
not comply with the regulations of your country may have a detrimental impact on health and the environ­
ment. Please observe the information provided by the responsible authorities in your country regarding
return and collection processes.

11 Legal Information

11.1 Liability

Otto Bock Healthcare Products GmbH, hereafter referred to as manufacturer, assumes liability only if the user
complies with the processing, operating and maintenance instructions as well as the service intervals. The manu­
facturer explicitly states that this device may only be used in combination with components that were authorised by
the manufacturer (see instructions for use and catalogues). The manufacturer does not assume liability for damage
caused by component combinations which it did not authorise. The device may only be opened and repaired by
authorised Ottobock technicians.

11.2 Trademarks

All denotations within this accompanying document are subject to the provisions of the respective applicable trade­
mark laws and the rights of the respective owners, with no restrictions.
All brands, trade names or company names may be registered trademarks and are subject to the rights of the
respective owners.
Should trademarks in this accompanying document fail to be explicitly identified as such, this does not justify the
conclusion that the denotation in question is free of third-party rights.

11.3 CE Conformity

This device meets the requirements of the 93 / 42 / EEC guidelines for medical devices. This device has been clas­
sified as a class I device according to the classification criteria outlined in appendix IX of the guidelines. The
AxonArm Hybrid 12K500=*, AxonArm Ergo 12K501=*
Beep Beep
1x long 2x short
seconds,
Beep Beep Beep
3x short 1x pulsating
short,
1x long
Settings
Ottobock | 35