7-3
Connecting the Power Cable
WARNING
Turn OFF the circuit breaker
for the power board when
connecting the power cable.
Otherwise, you may receive
an electrical shock.
When connecting the machine to
a power source with a voltage of
415V, 380V or 208V, change the
position of the white cable termi-
nal on the transformer terminal
board.
When connecting to a voltage 400V or 220V,
do not change the connection.
Install a circuit breaker.
The power consumption of the machine is
about 3.1 kW. Use a 15 A breaker.
Turn OFF the circuit breaker for
the power board.
Connect the power cable to the
power board.
Check that the power switch is turned OFF.
Turn ON the circuit breaker for
the power board.
CAUTION
When the power switch is
turned ON, if the knife does
not lower right away, turn the
power switch OFF immedi-
ately. If you do not, the ma-
chine may be damaged.
For 415V User Power Source
9
WHT
BLK
415V 400V 380V 0V
For 208V User Power Source
9
WHT
BLK
240V 220V 208V 0V
80
BLK
80
BLK
(83)