Cutting Button Check - Horizon Fitness APC-61 II Manual

2-4

Cutting Button Check

Check the cutting buttons.
Check that the power switch and
the key switch are both turned
ON.
Press only one cutting button.
Check that the machine does not run.
Press and hold one cutting but-
ton, and then press the other
cutting button.
Check that the machine does not run.
The machine runs only when both cutting
buttons are pressed at the same time
(within 0.5 seconds).
Press both cutting buttons at the
same time.
1. The clamp lowers.
2. The knife lowers.
3. The knife lifts.
4. The clamp lifts.
Check that the machine operates in the order
described above. (See the figure to the right.)
Knife
Clamp
1 2 3
Cutting
buttons
4
(21)