Maintenance; Cutting Stick Replacement - Horizon Fitness APC-61 II Manual

6-1

Cutting Stick Replacement

The knife makes a groove in the cutting
stick. If this groove becomes too large, the
bottom sheet may remain partly uncut, or
may be torn.
Replace the cutting stick.
Turn OFF the key switch and the
power switch.
Remove the cutting stick.
Remove the cutting stick from the groove.
Replace the cutting stick.
Each cutting stick can be used up to 8
times-four faces and two surfaces per face.
If all of the faces have been used already,
replace the part with a new cutting stick.
Clean out the groove where the cutting stick
is installed. Change the face of the cutting
stick or install a new cutting stick by pushing it
in from the end.

6. Maintenance

WARNING
- Turn OFF the power switch
and key switch before replac-
ing any parts. If the machine
starts suddenly, it may cause
severe personal injury.
- Wear gloves, and do not touch
the knife. The knife may cause
severe personal injury.
F
O F
O N
Key Switch
O F F
Power Switch
Cutting Stick
Groove
Two surfaces
per face
Cutting Stick
(63)