Horizon Fitness APC-61 II Manual page 50

4-3 Creating a Cutting Program
Change the cutting length and
push-out/repeat functions if nec-
essary.
Refer to steps through
1: "Entering Values to Create a Program."
Repeat steps and
procedure for any other program
steps which must be changed.
Save the settings under another
program number.
1) Press the Program Number Input area.
The Program Select Screen appears.
2) Select the program number on the Program
Select Screen.
The colors of the program number buttons have
the following meanings:
White: No program is stored.
Gray : A program has already been stored here.
Black: This program is currently selected.
3) Press the button.
- If a program has already been stored for the
selected program number, the Overwrite OK
Screen appears. If it is OK to overwrite, press the
OK button.
- A program number with a stored program turns
gray.
Now the programming process is complete.
in Section 4-3-
in this
Programming Screen
Program Select Screen
Program Select Screen
1
2
Overwrite OK Screen
3
Other pages show
additional program
numbers.
The program settings
are saved and the
button turns gray.
(43)