Maintenance - Backgauge Calibration Screen - Horizon Fitness APC-61 II Manual

1-2 Control Panel Screen Descriptions

1-2-14 Maintenance - Backgauge Calibration Screen

If the actual cutting length is different from the setting on the screen, the home
position of the backgauge should be calibrated.
This screen is used when calibrating the home position of the backgauge.
"Maintenance" Mode Screen
Current Home Position Indicator
1
This indicates the current home position value.
New Home Position Input
2
Enter the new home position value here.
Enter Button
3
After entering the value for the new home position, press this button. The new value will replace the
current value.
Home Position Button
4
After the value for the home position has been replaced (Enter button), press the Home Position Button
to move the backgauge to the new home position.
Back Button
5
The display goes back to the "Maintenance" Mode Screen.
4
5
"Backgauge Calibration" Screen
1
2
3
(15)