Horizon Fitness APC-61 II Manual page 80

6-3 Knife Angle and Cutting Depth Adjustments
If the knife does not reach the
cutting stick and some of the
sheets are not cut completely,
adjust the cutting depth adjusting
dial.
The knife moves by 0.2 mm (0.008") each
time the dial is turned by one notch.
If the cutting depth is too deep, this may
shorten the life of the knife and cutting
stick.
Repeat steps through
adjust the cutting depth so that
the sheets are cut evenly.
After making the adjustment, turn
OFF the power switch and key
switch.
, and
Cutting Depth Adjusting Dial
0
(73)