Changing The Push-Out Length - Horizon Fitness APC-61 II Manual

4-7

Changing the Push-out Length

You can set the distance the sheets are
pushed out after they are cut.
This is set to 50 mm (1.970") at the factory.
Press the button.
Press the button.
Press the Push-out Length Input
area on the screen.
On the Numeric Keypad Screen,
enter the push-out length.
This is adjustable within a range of 20 mm to
150 mm (0.785" to 5.905".)
After entering the value, press the
button. The value will be entered.
Maintenance Mode Screen
Push-out Length Setting Screen
Numeric Keypad Screen
= ent
(57)