Deleting A Step - Horizon Fitness APC-61 II Manual

4-3 Creating a Cutting Program

4-3-5 Deleting a Step

You can delete an unnecessary step in the
program.
Press the
The Programming Screen appears.
Select the program that has the
step you want to delete.
1) Press the Program Number Input area.
The Program Select Screen appears.
2) Select the program number on the Program
Select Screen.
White: No program is stored.
Gray : A program has already been stored here.
Black: This program is currently selected.
Move the step you want to delete
to the middle of the list.
Press the
- The Delete OK Screen appears. If it is OK to
delete the step, press the OK button.
Any deleted data can not be recalled. Check
carefully before pressing OK.
To cancel the delete function, press the
button.
- The step in the middle of the list is deleted and
the following steps move up by one step each.
- In example shown to the right, the original step
16 is deleted and the original step 17 changes to
the step 16.
If you want to delete all of the steps in a
program, see the next page, Section 4-3-6:
"Deleting a Program."
button.
button.
Programming Screen
1
Program Select Screen
2
3
Programming Screen
08
15 284. 0
240. 0
16
17 200. 0
Programming Screen
15 284. 0
200. 0
16
17 100. 0
The original step 17 moves up and
changes to the step 16.
Step Delete
Screen
Delete OK Screen
(45)