Creating A Cutting Program; Entering The Values To Create A Program - Horizon Fitness APC-61 II Manual

4-3

Creating a Cutting Program

4-3-1 Entering the Values to Create a Program

When you want to repeat the same cutting
job, or do a complicated job, it is helpful to
create and save a cutting program. The
program includes the cutting length for
each step. Following the program, the
backgauge automatically moves into posi-
tion for each cut.
There are two ways to create a program:
- Entering values for cutting length that
have already been figured out (Section
4-3-1).
- Cutting the sheets, and then saving each
cutting length to the program (Section 4-
3-2).
Press the
The Programming Screen appears.
- The setup for the first cut is displayed in the
middle of the list.
- The display for each step has four items:
1. The step number
2. The cutting length
3. The push-out distance
4. Whether the step is repeated, and how often
it is used.
Programming Screen
1
- Three steps, including the previous and next
step, are displayed on the screen. The step in the
middle of the list is the one currently being set
up.
button.
2 3 4
Programming Screen
420. 0
01 000. 0
000. 0
02
(35)