Inserting A Step - Horizon Fitness APC-61 II Manual

4-3 Creating a Cutting Program

4-3-4 Inserting a Step

A step can be added between the existing
steps.
Press the
The Programming Screen appears.
Select the program into which you
want to insert a new step.
Press the Program Number Input area to
select the program number.
Find the step just after the point where
you want to insert the new step. Move
this step to the middle of the list.
The new step is inserted in front of the step
which appears in the middle of the list. In
the example shown to the right, the new
step will be inserted in front of step 16.
Press the
- The new step is inserted and the following steps
move down by one step each.
- On the screen shown to the right, the original
step 16 changes to step 17, and the new step 16
is inserted. The cutting length of the new step is
"0."
Enter a cutting length into the
step you just inserted.
If the cutting length is left at "0" and you use
the cutting program, the machine thinks that
step is the end of the program, and the goes
back to the first step.
(44)
button.
button.
Programming Screen
420. 0
000. 0
01
000. 0
02
Programming Screen
1
Program Select Screen
2
3
08
15 284. 0
240. 0
16
17 200. 0
Programming Screen
08
15 284. 0
16 0
17 200. 0
Step Insert
Button