Hydraulic Pressure Unit Check - Horizon Fitness APC-61 II Manual

2-3

Hydraulic Pressure Unit Check

The knife and clamp are driven by hydraulic
pressure. Check that the hydraulic pump is
working correctly.
Check that the power switch is
turned ON.
Turn the key switch clockwise to
turn it ON.
The pump will begin to operate.
- If the machine has not been used for a long
time, the knife and clamp might be in the
lowered position.
If so, the knife and clamp may lift a little to
return to the upper limit position.
- The normal Cutting Screen will appear on the
control panel.
The value indicated on the screen is the home
position of the backgauge.
Press the
The Maintenance Mode Screen appears.
Press the button.
The Clamp Pressure Adjustment Screen ap-
pears.
button.
Control Panel
Normal Cutting Screen
621. 1
Maintenance Mode Screen
Clamp Pressure Adjustment Screen
ON
F
O F
O N
Key Switch
(19)