Copying A Program - Horizon Fitness APC-61 II Manual

4-3 Creating a Cutting Program

4-3-3 Copying a Program

This section describes the procedure for
copying a stored program and correcting it,
then storing the corrected program as a
new program.
Press the
The Programming Screen appears.
Recall the program you want to
copy.
1) Press the Program Number Input area.
The Program Select Screen appears.
2) Select the program number on the Program
Select Screen.
The colors of the program number buttons have
the followings meanings:
White: No program is stored.
Gray : A program has already been stored here.
Black: This program is currently selected.
3) Press the
The Programming Screen appears and the
recalled program and steps are shown on the
screen.
Move the step to be corrected to
the middle of the list.
- Only the step in the middle of the list can be
corrected. Move through the steps so that the
step to be corrected is positioned in the middle of
the list.
To move to the previous or the next step, press
the or
- When the button is pressed, the display goes
back to the first step.
(42)
button.
button.
buttons.
Programming Screen
420. 0
01 000. 0
000. 0
02
Programming Screen
1
Program Select Screen
2
3
03
01 280. 0
02 240. 0
Programming Screen
Only the step
in the middle
can be
changed.