Horizon Fitness APC-61 II Manual page 47

4-3 Creating a Cutting Program
Press the
to save the cutting length mea-
surements.
Move the backgauge to the posi-
tion you want to save as the cut-
ting length for the step.
- For details, see Section 4-1: "Cutting Operation
on the Cutting Line", steps
- Use the backgauge motion buttons to move the
backgauge.
- The position of the backgauge is shown on the
current length indicator.
Press both cutting buttons at once to
cut the sheets.
- After cutting, the cutting length is stored for the
current step.
- After the cutting length is stored, the program
goes to the next step automatically.
Repeat steps
all of the steps in the program.
If necessary, set the push-out and
repeat functions.
Set them by following step
Section 4-3-1: "Entering the Values to Create a
Program."
Press the
feature OFF.
(40)
button to prepare
through .
and , to set up
and in
button to turn this
Programming Screen
Backgauge Motion Buttons
Backward Button
High Speed Button
Forward Button
138. 5
Programming Screen
Current Length
Cutting Buttons