Horizon Fitness APC-61 II Manual page 63

4-6 Clamp Support Plate
Removing the plate
Turn OFF the key switch and the
power switch.
Remove the backgauge cover.
There are four mounting screws.
Insert the knife replacement tool
into the holes on the rear of the
clamp.
The clamp support plate will drop. Pull the
clamp support out from the bottom and
remove it.
To remove the clamp support plate easily,
keep it level.
Place the clamp support plate on
the bracket on the rear of the
machine.
Replace the backgauge cover.
(56)
OFF
F
O F
Key Switch
Backgauge Cover
Knife Replace-
ment Tool
Clamp Support Plate