Control Panel Screen Descriptions; Mode Descriptions - Horizon Fitness APC-61 II Manual

1-2

Control Panel Screen Descriptions

1-2-1 Mode Descriptions

There are four modes for the control screens on the APC-61II.
"Cutting" Mode
Use this mode during a cutting operation.
- Normal Cutting: Enter the cutting length manually for
each cut.
- Program Cutting: The position of the backgauge is set
automatically by a saved program.
See pages 4 and 5 for details.
"Memory" Mode
Use this mode to create a cutting program, including the
length and other settings, and store it as a sequence of
steps.
See pages 6 through 8 for details.
"Compression" Mode
Use this mode to do a compression operation, and
reduce the bulk of the booklet using the clamp pressure.
See page 9 for details.
"Maintenance" Mode
Use this mode to do maintenance (lubrication, knife
replacement and clamp pressure adjustment, etc.), and
to check the condition of the machine.
See pages 10 through 16 for details.
(3)