6-2
Knife Replacement
6-2-3 Removing the Knife
This section includes instructions for
removing the knife.
Turn the cutting depth adjusting
dial fully counterclockwise.
If the dial is fully turned to the right, the lower
limit of the knife is raised.
Turn ON the power switch and
the key switch.
Press the
button.
The Knife Replacement Screen is displayed.
Press both cutting buttons at
once.
The clamp lowers, then the knife lowers and
stops at the lower limit.
Turn OFF the key switch.
- Leave the power switch ON.
- For the rest of this procedure, keep the key switch
off except when you want to move the knife up or
down.
(66)
button, then the
CAUTION
Before replacing the knife,
please read and understand
the outline and notes on the
previous page.
Cutting Depth Adjusting Dial
0
F
O F
O N
Key Switch
O N
Power Switch
Maintenance Mode Screen
Knife Replacement Screen