Check On Automatic Return Of Knife; Check On One Cycle - Horizon Fitness Horizon PC-45 Instruction Manual

2. Safety Function Check
2-3 Check on Safe Functions

2-3-3 Check on Automatic Return of Knife

Check that knife at bottom position returns to
home position automatically and then stops.
1.
Press cut buttons A and B at the same
time.
2.
Release your hands from cut buttons when
knife is on the way to home position.
- Check that knife returns to home position
without stopping and then stops at home
position.

2-3-4 Check on One Cycle

Check that knife remains stationary if cut
buttons are continued to press after knife
returns to home position.
1.
Continue pressing to cut buttons about 5
seconds after knife returns to home posi-
tion. Check that knife does not work
again.
Next, check that knife remains stationary
unless both hands are released from cut
buttons.
2.
Release your hand from cut button B with
cut button A pressed.
3.
Press cut button B again. Check that knife
does not work.
Cut Button A
10
Knife
Cut Button B