Operation Panel Descriptions (T61) - Horizon Fitness APC-61 Manual

1-2 Operation Panel Descriptions (T61)

Power Lamp
Key Switch
Hydraulic Pressure Lamp
Hydraulic Pressure ON/OFF Switch
High Speed Backward Button
This button is used to move backgauge
backward at high speed.
Low Speed Forward Button
This button is used to move backgauge
forward at low speed.
High Speed Forward Button
This button is used to move backgauge forward at
high speed.
Repeat/Setup Select Button
In normal operation, this switch must be set to the repeat
mode. (The above repeat lamp lights up.) The size memory
button must be set to the setup mode.(The above setup Lamp
lights up.)
Push-out Memory Lamp
Repeat/Setup Lamp
Repeat Setup
Current position
APC-T61
HYDRULIC CUTTER HYDRULIC CUTTER
Full Memory Lamp
This lamp lights when input memory is full.
Operation Error Lamp
Put-out No More
Memory Memory Opar Error
? ?
Presetting Program No. Step.No.
7 8 9
Memory Replacing
Program
4 5 6 knife
Delete
P + P -
1 2 3 ON
Push-out
.
0 E
S + S -
c
Setup
Push-out Memory Button
Memory Button (for the Current Position)
Step Delete Button
Step Backward Button
Step Forward Button
1-5
Memory Button (for the Keypad Input)
Knife Operation Mode Select Switch
This switch is used select knife operation
mode, cutting mode or knife replace
mode. In normal operation, this switch
must be set to the cutting mode.