Table of Contents
Advertisement
Pulse output instructions
To run the FP0R in FP0 compatibility mode, you can download an FP0 program to the FP0R.
PLC types Availability of F170_PulseOutput_PWM (see page 1322)
Data types
Variable
s_dutDataTable
n_iPulseOutputChannel
Operands
For
s_dutDataTable
n_iPulseOutputChannel
Error flags
No.
IEC address
%MX0.900.7
R9007
%MX0.900.8
R9008
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
In the global variable list, you define variables that can be accessed by all POUs in the project.
GVL
DUT
The DUT F170_PulseOutput_PWM_DUT is predefined in the FP Library.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
LD
ST
1044
Data type
F170_PulseOutput_PWM_DUT
INT
Relay
-
-
-
-
-
-
-
-
Set
If
permanently
channel number or values of the data table are outside the
permissible range
for an instant
Function
Starting address of area containing the data table
Pulse output channel:: 0 or 1
T/C
Register
-
-
DT
-
-
-
-
-
Constant
-
-
-
dec. or hex.
Advertisement
Table of Contents
