Panasonic FP Series Programming Manual page 1169

Hide thumbs Also See for FP Series:

Table of Contents

High-speed counter instructions

Output variable

In this example the function has been programmed in ladder diagram (LD) and structured text (ST).

(ST).The same POU header is used for all programming languages.

In the global variable list you define variables that can be accessed by all POUs in the project.

All input and output variables used for programming this function have been declared in the POU

Use HscInfo_IsActive (see page 1157) to evaluate the channel specified by iChannel1. If a rising

edge is detected at bReset and if bIsActive is not TRUE, the instruction is executed. The

combination of channel number and output contact is validated in the global variable

g_bHsc_TargetValueMatch_Channel1_Y7_YellowLamp_On. When the high-speed counter on

channel 1 reaches the target value diTargetValue1, output Y7 is set to FALSE.

bIsActive:=HscInfo_IsActive(iChannel1);

Hsc_TargetValueMatch_Reset(bExecute

GetPointer(g_bHsc_TargetValueMatch_Channel1_Y7_YellowLamp_On),

TRUE if the combination of Channel%d and pYOuput.iOffset does not

match a valid combination of channel number and output relay as

determined by the global variable

:= iChannel1,

diTargetValue

:= diTargetValue1,

=> bErrorReset);

:= DF(bReset)