Panasonic FP Series Programming Manual page 1281

Appendix Programming Information
No. Name
Pulse catch input:
403
X101
Pulse catch input:
403
X102
Pulse catch input:
403
X200
Pulse catch input:
403
X201
Pulse catch input:
403
X202
Interrupt input:
404/
405

X0 Interrupt 0
Interrupt input:
404/
405 
X1 Interrupt 1
Interrupt input:
404/
405

X2 Interrupt 2
Interrupt input:
404/
405 
X3 Interrupt 3
Interrupt input:
404/
405 
X4 Interrupt 4
Interrupt input:
404/
405

X5 Interrupt 5
Interrupt input:
404/
405

X6 Interrupt 6
Interrupt input:
404/
405 
X7 Interrupt 7
Interrupt input
404/
406

X100 Interrupt 8
Interrupt input
404/
406

X101 Interrupt 9
Interrupt input
404/
406 
X102 Interrupt 10
Interrupt input
404/
406

X200 Interrupt 11
Interrupt input
404/
406 
X201 Interrupt 12
Interrupt input
404/
406

X202 Interrupt 13
If the same input has been set as high-speed counter input, pulse catch input or
interrupt input, the following order of precedence is effective: High-speed
counter  Pulse catch  Interrupt.
The two-phase input mode requires a second channel. If channels 0, 2, 4, or 6
have been set to two-phase mode, channels 1, 3, 5, or 7, respectively, must also
be set to this mode.
The settings for pulse catch inputs and interrupt inputs can only be specified in
the system registers.
1280
Default Values
Disable Disable/Enable
Disable Disable/Enable
Disable Disable/Enable
Disable Disable/Enable
Disable Disable/Enable
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge
Unused Rising edge/Falling edge