Panasonic FP Series Programming Manual page 1286

No. Name
PLC link 0 - Link relays - Send area - Number of words to send
43
PLC link 0 - Link registers - Send/receive area - Number of words
41
shared by all linked PLCs
PLC link 0 - Link registers - Send area - Start sending from this
44
word address
PLC link 0 - Link registers - Send area - Number of words to send
45
PLC link 1 - Highest station number in network
57
PLC link 1 - Link relays - Send/receive area - Number of words
50
shared by all linked PLCs
PLC link 1 - Link relays - Send area - Start sending from this word
52
address
PLC link 1 - Link relays - Send area - Number of words to send
53
PLC link 1 - Link registers - Send/receive area - Number of words
51
shared by all linked PLCs
PLC link 1 - Link registers - Send area - Start sending from this
54
word address
PLC link 1 - Link registers - Send area - Number of words to send
55
High-Speed Counter, Pulse Catch Input, Interrupt Input
Name
No.
High-speed counter:
400
Channel 0
High-speed counter:
400
Channel 1
High-speed counter:
401
Channel 2
High-speed counter:
401
Channel 3
Default Values
Unused  Two-phase input (X0, X1)
 Two-phase input (X0, X1), Reset input (X2)
 Incremental input (X0)
 Incremental input (X0), Reset input (X2)
 Decremental input (X0)
 Decremental input (X0), Reset input (X2)
 Incremental input (X0), Decremental input (X1)
 Incremental input (X0), Decremental input (X1), Reset input (X2)
 Counter input (X0), Incremental/decremental control input (X1)
 Counter input (X0), Incremental/decremental control input (X1),
Reset input (X2)
Unused  Incremental input (X1)
 Incremental input (X1), Reset input (X2)
 Decremental input (X1)
 Decremental input (X1), Reset input (X2)
Unused  Two-phase input (X3, X4)
 Two-phase input (X3, X4), Reset input (X5)
 Incremental input (X3)
 Incremental input (X3), Reset input (X5)
 Decremental input (X3)
 Decremental input (X3), Reset input
 Incremental input (X3), Decremental input (X4)
 Incremental input (X3), Decremental input (X4), Reset input
 Counter input (X0), Incremental/decremental control input (X5)
 Counter input (X3), Incremental/decremental control input (X4),
Reset input X5)
Unused  Incremental input (X4)
 Incremental input (X4), Reset input (X5)
 Decremental input (X4)
 Decremental input (X4), Reset input (X5)
Appendix Programming Information
Default Values
0 0–64 words
0 0–128 words
0 0–127
0 0–127 words
16 1–16
0 0–64 words
64 64–127
0 0–64 words
0 0–128 words
128 128–255
0 0–127 words
1285