Panasonic FP Series Programming Manual page 1261

Appendix Programming Information
Type
Data registers
2)
Link registers
2)
Timer/counter set value
area
2)
Timer/counter elapsed
value area
2)
Special data registers
Memory area [double words]
Type
External input relays
1)
External output relays
1)
Internal relays
2)
Link relays
Data registers
2)
Link registers
2)
Timer/counter set value
area
2)
Timer/counter elapsed
value area
2)
Special data registers
1260
Memory Available address area
size
FP
32763 DT0–DT32762
256 LD0–LD255
1024 SV0–SV1023
1024 EV0–EV1023
260 DT90000–
DT90259
Memory Available address area
size
FP
37 DWX0–DWX72
37 DWY0–DWY72
128 DWR0–DWR254
64 DWL0–DWL126
16382 DDT0–
DDT32763
128 DLD0–DLD254
512 DSV0–DSV1022
512 DEV0–DEV1022
130 DDT90000–
DDT90258
IEC
%MW5.0– Data memory used in a program.
%MW5.32762 Data is handled in 16-bit units
(one word).
%MW8.0– Data memory shared by multiple
%MW8.255 PLCs connected using PLC link.
Data is handled in 16-bit units
(one word).
%MW3.0– Data memory for storing the set
%MW3.1023 values of timers or counters. The
values are stored by
timer/counter number.
%MW4.0– Data memory for storing the
%MW4.1023 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MW5.90000– Data memory for storing settings
%MW5.90259 and error codes.
IEC
%ID0– Code for specifying 32 external
%ID72 input points as a double word (32
bits) of data.
%QD0– Code for specifying 32 external
%QD72 output points as a double word
(32 bits) of data.
%MD0.0– Code for specifying 32 internal
%MD0.254 relay points as a double word (32
bits) of data.
%MD7.0– Code for specifying 32 link relay
%MD7.126 points as a double word (32 bits)
of data.
%MD5.0– Data memory used in a program.
%MD5.32763 Data is handled in 32-bit units
(double word).
%MD8.0– Data memory shared by multiple
%MD8.254 PLCs connected using PLC link.
Data is handled in 32-bit units
(double word).
%MD3.0– Data memory for storing the set
%MD3.1022 values of timers or counters. The
values are stored by
timer/counter number.
%MD4.0– Data memory for storing the
%MD4.1022 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MD5.90000– Data memory for storing settings
%MD5.90258 and error codes.
Function
Function