Panasonic FP Series Programming Manual page 1267

Appendix Programming Information
Type
External input relays
Pulse relays
Special internal relays
Memory area [words]
Type
External input relays
External output relays
Internal relays
Link relays
Data registers
1)
Link registers
1)
Timer/counter set value
area
1)
Timer/counter elapsed
value area
1)
File 12k type
registers
1)
32k type
3)
(expanded)
Special data registers
Index registers
Memory area [double words]
Type
External input relays
1)
External output relays
1)
1266
Memory Available address area
size
F/P
2048 X0–X127F
1024 P0–P63F
176 R9000–R910F
Memory Available address area
size
F/P
128 WX0–WX127
128 WY0–WY127
253 WR0–WR252
128 WL0–WL127
6000 DT0–DT5999
256 LD0–LD255
1024 SV0–SV1023
1024 EV0–EV1023
14333 FL0–FL14332
30717 FL0–FL30716
256 DT90000–
DT90255
14 I0–ID
Memory Available address area
size
F/P
64 DWX0–DWX72
64 DWY0–DWY72
IEC
%IX0.0– Turn on or off based on external
%IX127.15 input.
%MX11.0.0– Turn on for one scan only. Used
%MX11.63.15 internally by the PLC program.
%MX0.900.0– Turn on or off based on specific
%MX0.910.15 conditions. Used internally as a
flag.
IEC
%IW0– Code for specifying 16 external
%IW127 input points as one word (16 bits)
of data.
%QW0– Code for specifying 16 external
%QW127 output points as one word (16
bits) of data.
%MW0.0– Code for specifying 16 internal
%MW0.252 relays as one word (16 bits) of
data.
%MW7.0– Code for specifying 16 link relays
%MW7.127 as one word (16 bits) of data.
%MW5.0– Data memory used in a program.
%MW5.5999 Data is handled in 16-bit units
(one word).
%MW8.0– Data memory shared by multiple
%MW8.255 PLCs connected using PLC link.
Data is handled in 16-bit units
(one word)..
%MW3.0– Data memory for storing the set
%MW3.1023 values of timers or counters. The
values are stored by
timer/counter number.
%MW4.0– Data memory for storing the
%MW4.1023 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MW9.0– Data memory used in a program.
%MW9.14332 Data is handled in 16-bit units
(one word).
%MW9.0–
%MW9.30716
%MW5.90000– Data memory for storing settings
%MW5.90255 and error codes.
%MW6.0– Data memory used to modify
%MW6.13 constants and memory area
addresses.
IEC
%ID0– Code for specifying 32 external
%ID72 input points as a double word (32
bits) of data.
%QD0– Code for specifying 32 external
%QD72 output points as a double word
(32 bits) of data.
Function
Function
Function