Panasonic FP Series Programming Manual page 1263

Appendix Programming Information
Type
C30, C60
Link registers
2)
Timer/counter set value
area
2)
Timer/counter elapsed
value area
2)
Special data registers
Index registers
Memory area [double words]
Type
External input relays
1)
External output relays
1)
Internal relays
2)
Link relays
Data C14
registers
2)
C30, C60
Link registers
2)
Timer/counter set value
area
2)
Timer/counter elapsed
value area
2)
1262
Memory Available address area
size
F/P
32765 DT0–DT32764
256 LD0–LD255
1024 SV0–SV1023
1024 EV0–EV1023
374 DT90000–
DT90373
14 I0–ID
Memory Available address area
size
F/P
55 DWX0–DWX108
55 DWY0–DWY108
128 DWR0–DWR254
64 DWL0–DWL126
6142 DDT0–
DDT12283
16382 DDT0–
DDT32763
128 DLD0–DLD126
512 DSV0–DSV1022
512 DEV0–DEV1022
IEC
%MW5.0–
%MW5.32764
%MW8.0– Data memory shared by multiple
%MW8.255 PLCs connected using PLC link.
Data is handled in 16-bit units
(one word)..
%MW3.0– Data memory for storing the set
%MW3.1023 values of timers or counters. The
values are stored by
timer/counter number.
%MW4.0– Data memory for storing the
%MW4.1023 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MW5.90000– Data memory for storing settings
%MW5.90373 and error codes.
%MW6.0– Data memory used to modify
%MW6.13 constants and memory area
addresses.
IEC
%ID0– Code for specifying 32 external
%ID108 input points as a double word (32
bits) of data.
%QD0– Code for specifying 32 external
%QD108 output points as a double word
(32 bits) of data.
%MD0.0– Code for specifying 32 internal
%MD0.254 relay points as a double word (32
bits) of data.
%MD7.0– Code for specifying 32 link relay
%MD7.126 points as a double word (32 bits)
of data.
%MD5.0– Data memory used in a program.
%MD5.12283 Data is handled in 32-bit units
(double word).
%MD5.0–
%MD5.32763
%MD8.0– Data memory shared by multiple
%MD8.126 PLCs connected using PLC link.
Data is handled in 32-bit units
(double word).
%MD3.0– Data memory for storing the set
%MD3.1022 values of timers or counters. The
values are stored by
timer/counter number.
%MD4.0– Data memory for storing the
%MD4.1022 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
Function
Function