Panasonic FP Series Programming Manual page 1147

High-speed counter instructions
HscControl_Elapsed
ValueReset
This instruction sets the elapsed value of the high-speed counter channel specified by iChannel to
Description
0. Bit 0 of the high-speed counter control code (see page 891) is set to TRUE.
See also:
 Tool instructions: overview of high-speed counter instructions
 HscControl_WriteElapsedValue (see page 1152)
 HscControl_ElapsedValueContinue (see page 1143)
 HscInfo_IsElapsedValueReset (see page 1160)
To add an enable input and enable output to the instruction, select [With EN/ENO] from the
"Instructions" pane (LD, FBD or IL editor). To reuse an instruction select "Recently used" from the
context menu or press <Ctrl>+<Shift>+<v> in the programming window.
see page 1327
PLC types
Data types
Variable
iChannel
In this example the function has been programmed in ladder diagram (LD) and structured text (ST).
Example
The same POU header is used for all programming languages.
POU header All input and output variables used for programming this function have been declared in the POU
header.
Body When the variable bResetElapsedValue changes from FALSE to TRUE, the elapsed value on the
channel specified by iChannel is set to 0.
LD
1146
Sets elapsed value to 0
Data type Function
INT High-speed counter channel:

FP : 0, 2
FP-X R: 0, 1
FP-X 16K C14T: 0, 1, 2
FP-X 32K C30T, C60T: 0, 1, 2, 3
FP0R: 0, 1, 2, 3
FP0: 0, 1
FP-e: 0, 1