Table of Contents
Advertisement
Data transfer via communication ports
under "Recently used" in the pop-up menu. Press <Ctrl>+<Shift>+<v> within the programming
area to open the list of recently used elements.
Configuration of communication parameters:
1. UnitNumber (station 1 to 99)
2. BaudrateValue (0 to 10) *2
*2. Baud rate setting value
Storage value
0
1
2
3
4
5
6
7
8
9
10
3. CharacterBitsValue (0=7 bits, 1=8 bits)
4. ParityValue (0=no parity, 1=parity 0, 2=odd, 3=even)
5. StopBitLengthValue (0=1 bit, 1=2 bits)
6. RS_CS_IsValid (0=disable, 1=enable)
7. SendWaitingTime (0=time for about three characters/effective time=n*0.01ms (0 to 100ms))
8. SendingHeaderValue (0=No STX, 1=STX)
9. SendingTerminator_ReceptionDoneCriterion_Value (0=CR, 1=CR+LF, 2=No SendingTerminator,
ReceptionDone by Timeout (24 bits), 3 =EXT)
10. ReceptionDoneTimeOut (0=immediate/effective time=n*0.01 ms (0 to 100 ms)
11. InitModemWhenPowerTurnsOn (0=not initialized, 1=initialized)
Data types
Variable
Data type
MCU_PARA_DUT
s_Para
ANY16
d_Port
720
Baud rate
300
600
1200
2400
4800
9600
19200
38400
57600
115K
230K
Function
Communication parameters defined in the predefined
DUT
Specification of slot number (high byte) and port number
(low byte) of the MCU to which the data is transmitted.
16#xx01: COM1 on MCU in slot 16#xx
16#xx02: COM2 on MCU in slot 16#xx
Advertisement
Table of Contents
