Panasonic FP Series Programming Manual page 1265

Appendix Programming Information
Type
External output relays
1)
Internal relays
2)
Data registers
2)
Timer/counter set value
area
2) 3)
Timer/counter elapsed
value area
2) 3)
Special data registers
Index registers
Memory area [double words]
Type
External input relays
1)
External output relays
1)
Internal relays
2)
Data registers
2)
Timer/counter set value
area
2) 3)
Timer/counter elapsed
value area
2) 3)
Special data registers
1264
Memory Available address area
size
F/P
13 WY0–WY12
63 WR0–WR62
1660 DT0–DT1659
144 SV0–SV143
144 EV0–EV143
112 DT90000–
DT90111
2 IX, IY
Memory Available address area
size
F/P
6 DWX0–DWX11
6 DWY0–DWY11
31 DWR0–DWR61
830 DDT0–
DDT1658
72 DSV0–DSV142
72 DEV0–DEV142
56 DDT90000–
DDT90110
IEC
%QW0– Code for specifying 16 external
%QW12 output points as one word (16
bits) of data.
%MW0.0– Code for specifying 16 internal
%MW0.62 relays as one word (16 bits) of
data.
%MW5.0– Data memory used in a program.
%MW5.1659 Data is handled in 16-bit units
(one word).
%MW3.0– Data memory for storing the set
%MW3.143 values of timers or counters. The
values are stored by
timer/counter number.
%MW4.0– Data memory for storing the
%MW4.143 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MW5.90000– Data memory for storing settings
%MW5.90111 and error codes.
%MW6.0– Data memory used to modify
%MW6.1 constants and memory area
addresses.
IEC
%ID0– Code for specifying 32 external
%ID11 input points as a double word (32
bits) of data.
%QD0– Code for specifying 32 external
%QD11 output points as a double word
(32 bits) of data.
%MD0.0– Code for specifying 32 internal
%MD0.61 relay points as a double word (32
bits) of data.
%MD5.0– Data is handled in 32-bit units
%MD5.1658 (double word).
%MD3.0– Data memory for storing the set
%MD3.142 values of timers or counters. The
values are stored by
timer/counter number.
%MD4.0– Data memory for storing the
%MD4.142 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MD5.90000– Data memory for storing settings
%MD5.90110 and error codes.
Function
Function