Panasonic FP Series Programming Manual page 1270

Type
Timer/counter elapsed
value area
1)
File registers
1)
Special data registers
Index registers
Memory area [double words]
Type
External input relays
1)
External output relays
1)
Internal relays
2)
Link relays
Data registers
2)
Link registers
2)
Timer/counter set value
area
2)
Timer/counter elapsed
value area
2)
File registers
Special data registers
Memory Available address area
size
F/P
3072 EV0–EV1023
98295 FL0–FL32764

(32765 3
banks)
512 DT90000–
DT90511
14 I0–ID
Memory Available address area
size
F/P
256 DWX0–DWX510
256 DWY0–DWY510
443 DWR0–DWR885
320 DWL0–DWL638
5120 DDT0–
DDT10238
4224 DLD0–DLD8446
1513 DSV0–DSV3070
1513 DEV0–DEV3070
16382 DFL0–DFL32763
265 DDT90000–
DDT90510
IEC
%MW4.0– Data memory for storing the
%MW4.1023 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MW9.0– Data memory used in a program.
%MW9.32764 Data is handled in 16-bit units
(one word).
%MW5.90000– Data memory for storing settings
%MW5.90511 and error codes.
%MW6.0– Data memory used to modify
%MW6.13 constants and memory area
addresses.
IEC
%ID0– Code for specifying 32 external
%ID510 input points as a double word (32
bits) of data.
%QD0– Code for specifying 32 external
%QD510 output points as a double word
(32 bits) of data.
%MD0.0– Code for specifying 32 internal
%MD0.885 relay points as a double word (32
bits) of data.
%MD7.0– Code for specifying 32 link relay
%MD7.638 points as a double word (32 bits)
of data.
%MD5.0– Data memory used in a program.
%MD5.10238 Data is handled in 32-bit units
(double word).
%MD8.0– Data memory shared by multiple
%MD8.8446 PLCs connected using PLC link.
Data is handled in 32-bit units
(double word).
%MD3.0– Data memory for storing the set
%MD3.3070 values of timers or counters. The
values are stored by
timer/counter number.
%MD4.0– Data memory for storing the
%MD4.3070 elapsed values during operation
of timers or counters. The values
are stored by timer/counter
number.
%MD9.0– Data memory used in a program.
%MD9.32763 Data is handled in 16-bit units
(one word).
%MD5.90000– Data memory for storing settings
%MD5.90510 and error codes.
Appendix Programming Information
Function
Function
1269