Installation - Festo VTSA Series Description

3. Installation

Contents of this chapter
Additional information
Festo P.BE−VTSA−44−EN en 0905e
This chapter describes the tubing and cabling of the VTSA...
valve terminal. This specifically includes the following:
General instructions on preparing the compressed air and
on connecting the tubing
Instructions on pilot control with an internal or external
pilot air supply
Instructions on operating the valve terminals with
pressure zones
Instructions on operating the valve terminal with
reversible 2x3/2−way valves
Mounting the QS fittings
Connecting the power supply
Earthing the valve terminal
Address assignment of the valves
Instructions on connecting the electrical components of the
VTSA... valve terminal with a multi−pin node can be found in
the relevant package insert.
Requirements for observing the certified UL conditions if the
product is operated in the USA or Canada can be found in the
separate special UL−specific documentation.
Instructions on connecting the operating voltage for the
VTSA... valve terminal with CPX terminal can be found in
Chapter 3 of the CPX system manual.
Detailed instructions on how to connect CPX modules (field
bus nodes, I/O modules, etc.) can be found in the correspon
ding CPX module descriptions. Detailed instructions for con
necting typ 03 modules (fieldbus nodes, I/O modules) can
be found in the corresponding descriptions for the type
03 modules.
3−3