Festo VTSA Series Description page 63

2. Mounting
Contents of this chapter
Additional information
Festo P.BE−VTSA−44−EN en 0905e
The VTSA... valve terminal is already assembled when
supplied from the factory.
This chapter describes how to assemble and dismantle:
The complete valve terminal (H−rail or wall mounting)
The mounting bracket for wall mounting
The inscription label holders
The manual override caps
Special information on replacing or adding pneumatic compo
nents can be found in Chapter 5.
VTSA... valve terminal with CPX terminal or FB21 (type 03):
Information on connecting the valve terminal with the CPX
terminal can be found in the CPX system manual.
Information on connecting and dismantling the I/O mod
ules can be found in the manual for the CPX I/O modules
or in the additional description of type 03 I/O modules.
Information on mounting modules and components or
dered at a later stage can be found in the package insert.
2−3