Mounting Accessories; Installation; Electrical Installation - Festo EHPS LK Series Instructions & Operating

Installation

NOTICE!
Accumulation of heat results from cramped installation situation.
Material damage or malfunction.
• Mount the product with sufficient space for heat dissipation.
1. Press 2 centring sleeves into the locating holes of the gripper.
2. Use the centring sleeves to position the gripper on the connecting surface.
3. Select screws in accordance with the type of mounting.
4. Tighten screws with the associated tightening torque.
Size
Direct mounting
Screw
Max. screw-in depth
Centring hole
Tightening torque
Through-hole mounting
Screw
Centring hole
Tightening torque
Tab. 3 Mounting attachments and tightening torque
6.4

Mounting accessories

If required: use proximity sensor to sense the position of the gripper jaws in the slot.
Use only proximity sensors approved for the product.
7 Installation
7.1

Electrical installation

WARNING!
Risk of injury due to electric shock
• For the electric power supply, use only PELV or SELV circuits that ensure a reliable electric discon-
nection from the mains network.
10
16
M4
[mm] 8
[mm] 7
[Nm] 2.9
M3
[mm] 7
[Nm] 1.2
20
M4
8
7
2.9
M3
7
1.2
Festo — EHPS-...-LK — 2019-08
25
M6
12
9
10
M4
9
2.9