Festo VTSA Series Description page 151

5. Maintenance and conversion
1
Manifold
sub−base
2
Guide pins
3
Seal plate
4
Right end plate
Fig. 5/5: Mounting the right end plate
Festo P.BE−VTSA−44−EN en 0905e
1
2
3. Screw the components together with the original hexagon
socket head screws. These screws have a screw head with
gear teeth. Tighten the screws in the sequence 1, 4, 3,
2 at first slightly, then with 3.0 Nm
for position).
4. Fit the valve terminal onto the mounting surface (see
Chapter 2 Mounting, Wall mounting" or H−rail mount
ing").
5. Then install the pneumatic and electrical connections
(see Chapter 3 Installation, Connecting the VTSA... valve
terminal").
2 3
. (See Fig. 5/3
(±10 %)
4
5−17