Festo VTSA Series Description page 14

Contents and general safety instructions
Term/abbreviation
90°−connection plate
Basic components
Blanking plate
Components
CPX modules
CPX terminal
End plate
Exhaust plate
Exhaust port cover
FB 21, type 03
I/O
Manifold sub−base
MO
XII
The following product−specific terms and abbreviations are
used in this manual:
Meaning
90°−connection plate
With working lines (2) and (4)
The 90°−connection plate is attached to the connection side of the
manifold sub−base.
Pneumatic interface, pneu. manifold sub−base and pneu. supply
plate
Cover for a non−assigned valve position on the manifold sub−base
Common term for pneumatic interface, pneumatic manifold sub−
base or pneumatic supply plate, end plate, 90°−connection plate,
exhaust plate, exhaust port cover, vertical pressure supply plate,
pressure regulator plate, flow control plate, soft−start valve, direc
tional control valve or blanking plate
Common term for the various modules which can be incorporated in
a CPX terminal
Modular electric terminal of type 50
Extreme right−hand plate on the VTSA or VTSA−F valve terminal
Extreme left−hand plate on the CPX terminal
With holes for wall mounting
Cover of the pneumatic supply plate
With separate exhaust ports (3) and (5)
Cover of the pneumatic supply plate
Common exhaust port (3/5)
INTERBUS Rugged Line" optic fibre cable remote bus fieldbus
connection
Input/output modules
Plate with electrical interlinking module
With two valve positions for 18 mm and 26 mm widths
With one valve position for 42 mm (I SO 1) and 52 mm (ISO 2)
widths
Per valve position with working lines (2) and (4).
Manual override
Festo P.BE−VTSA−44−EN en 0905e