Installing The Tubing - Festo VTSA Series Description

3. Installation

3.2.1 Installing the tubing

Connecting
3−8
If elbow connectors or multiple distributors are used, the air
flow will be reduced slightly.
Proceed as follows:
1. Push the tubing as far as possible into or over the tube
coupling of the threaded connector.
2. Depending on connection:
Pull any locking ring 1 over the tube coupling
(see Fig. 3/1).
Tighten the clamping screw 2 (see Fig. 3/1).
On the right end−plate, size 2:
Mount the hoses first at port (1) and then at ports (3)
and (5).
Secure the hoses with a hose clamp 3.
3. To have a better overview of the system, group the in
stalled tubing together with:
Tubing straps
Multiple hose holders
Fig. 3/1: Mounting the tubing connections
Festo P.BE−VTSA−44−EN en 0905e
2
1
3