Festo VTSA Series Description page 74

2. Mounting
2.3 Mounting/dismounting the inscription label holder (optional)
Mounting
Dismounting
1
Mounting for
identification
plate holder on
the manifold
sub−base
2
Inscription label
holder
Fig. 2/4: Mounting the inscription label holder
2−14
An inscription label holder can be mounted onto each mani
fold sub−base to label the valves or working lines.
Clip the inscription label holders into the recesses in the
manifold sub−bases (see fig.).
Pull the inscription label holder out of the mounting on the
manifold sub−base.
Festo P.BE−VTSA−44−EN en 0905e
1
2