Festo VTSA Series Description page 162

A. Technical appendix
General
Weights [g]:
Left end plate (CPX terminal)
per complete CPX module
Pneumatic interface
Multi−pin node (Sub−D, cage clamp,
M23 round plug, IC connection)
per pneumatic supply plate with ex
haust plate or exhaust cover
right end plate (axial connections)
right selector end plate
Soft−start valve with manifold sub−base
per manifold sub−base)
per 90°−connection plate
per valve
per cover plate for non−assigned valve
position
per pressure regulator plate (P)
per pressure regulator plate (A or B)
per pressure regulator plate (AB)
per flow control plate
per vertical pressure supply plate
per vertical pressure shut−off plate
1) Without threaded connectors
2) For widths 18 mm and 26 mm for two valve positions, for widths 42 mm and 52 mm for one valve
position
Tab. A/2: General technical data for the VTSA... valve terminal (continued)
A−4
Note
The valves can be used at temperatures down to 5
In order to prevent the condensate and the humidity from
freezing, we recommend that you fit a dryer with which
condensate and humidity can be removed.
approx. 80 g
approx. 210 g
1470 g
approx. 550 g
approx. 610 g
1)
339 g
1)
281 g
1200 g
Width
18 mm
1) 2)
447 g
1)
155 g
approx.
180 g
34 g
350 g
367 g
611 g
228 g
1)
140 g
209 g
26 mm 42 mm
634 g 340 g
217 g 176 g
approx. approx.
320 g 450 g
73 g 68 g
402 g 640 g
448 g 640 g
692 g 920 g
320 g 220 g
191 g 340 g
273 g 600 g
Festo P.BE−VTSA−44−EN en 0905e
o
C.
52 mm
591 g
359 g
approx.
726 g
145 g
1166 g
−−−
−−−
568 g
576 g
1106 g