Contents and general safety instructions
Target group
Service
VIII
Certain product configurations have been certified by the
Underwriters Laboratories Inc. (UL) for the USA and Canada.
These configurations are marked as follows:
Note
Observe the following if the UL requirements are to be
complied with in your application:
Regulations for complying with the UL certification can
be found in the separate special UL−specific documenta
tion. The technical data which is valid there applies with
priority.
The technical data in this documentation may show
values deviating from this.
This manual is directed exclusively toward technicians trained
in control and automation technology.
Please consult your local Festo repair service if you have any
technical problems.
Festo P.BE−VTSA−44−EN en 0905e