Festo VTSA Series Description page 65

2. Mounting
2.2 Mounting variants
Festo P.BE−VTSA−44−EN en 0905e
You can mount the VTSA... valve terminal two different ways:
Mounting method
H−rail mounting
Wall mounting
Tab. 2/1: VTSA... valve terminal mounting methods
Note
Mount the VTSA... valve terminal so that there is sufficient
space for heat dissipation and ensure that the maximum
limits for temperatures are observed (see Appendix A,
Technical data").
Description
Except for the VTSA valve terminal with
FB 21 (type 03), all the other variants of
the VTSA... valve terminal are suitable for
mounting on an H−rail (DIN mounting rail in
accordance with EN 60715).
Follow the safety instructions in the fol
lowing chapter. There is a guide groove on
the reverse for hanging the valve terminal
onto the H−rail.
The multi−pin node, the pneumatic inter
face and the end plates contain holes for
mounting the terminal onto a wall.
In the case of valve terminals with more
than five manifold sub−bases, additional
mounting brackets may be required on
the pneumatic supply plates (see the fol
lowing instructions and specifications on
vibration and shock in appendix A,
Tab. A/4).
2−5