Festo VTSA Series Description page 68

2. Mounting
1
H−rail
2
Retaining screw
of the H−rail
clamping unit
3
Clamping
component of the
H−rail clamping
unit
Fig. 2/1: Mounting the VTSA... valve terminal on an H−rail
2−8
4. Mount the H−rail clamping units (see Tab. 2/2)
5. Hang the valve terminal onto the H−rail (see Fig. 2/1,
arrow (A)).
6. Swing the valve terminal onto the H−rail (see Fig. 2/1,
arrow (B)). Make sure that the clamping component lies
horizontally with respect to the H−rail.
(A)
3
7. Secure the VTSA... valve terminal, as with the CPX ter
minal, against tilting or sliding by tightening the retaining
screw with 1.3 Nm.
(B)
Festo P.BE−VTSA−44−EN en 0905e
1
2