Intended Use; Range Of Application And Certifications - Festo VTSA Series Description

Contents and general safety instructions

Intended use

Range of application and certifications

Festo P.BE−VTSA−44−EN en 0905e
The VTSA... valve terminals described in this manual are
intended for fitting into a machine or automated system.
The user must observe the safety instructions specified in
this manual at all times as well as the instructions concerning
the intended use of the relevant VTSA... valve terminal.
The VTSA... valve terminals may only be used as follows:
As intended in an industrial environment
In its original condition without unauthorised modifica
tions.
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
In perfect technical condition.
When used together with commercially available compo
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data, torques etc. must be observed.
The applicable national and local safety regulations must also
be observed.
The product meets the requirements of the EU directives and
is marked with the CE marking.
Standards and test values, which the product must comply
with and meet, can be found in the Technical data" section.
The product−relevant EU directives can be found in the
declaration of conformity.
VII