Designated Use; Target Group; Instructions On This Manual - Festo Compact Performance Series Programming And Diagnosis

Hide thumbs Also See for Compact Performance Series:

Table of Contents

Contents and general safety instructions

Designated use

The CP field bus node CP-FB8 documented in this ma-

nual is designated exclusively for use as a slave on the

RIO network of Allen-Bradley. Festo CP modules can

be connected to the field bus node CP-FB8. If used

with additional commercially-available components such

as sensors and actuators, the specified limit values for

pressures, temperatures, electrical data, moments, etc.

must be observed.

Please comply also with national and local safety laws

and regulations.

This manual is directed exclusively at technicians who

are trained in control and automation technology and

who have experience in installing, commissioning, pro-

gramming and diagnosing RIO network slaves.

This manual contains specific information on the instal-

lation, commissioning, programming and diagnosis of

CP field bus node 8 for the RIO network.

Information on further CP modules can be found in the

relevant manual. These are summarized in the following

table.

CP FB8 9809a

Table of Contents

Cp fieldbus node 8 Cp-fb8