Contents and general instructions
Target group
Service
Notes on the use of this manual
VI
This manual is intended exclusively for technicians trained in
control and automation technology, who have experience in
installing, commissioning, programming and diagnosing the
slaves for the field bus systems above.
Please consult your local Festo repair service if you have any
technical problems.
This manual contains specific information on installing, com-
missioning, programming and diagnosing CP field bus node
FB5.
Information on further CP modules can be found in the man-
ual for the relevant module. A summary is shown in fig. 0/1.
Festo P.BE-CP-FB5-E-EN en 0112a