ADC Release 3.1 User Manual page 372

1152700 Issue 1 February 2001 Operation and Maintenance
DLP-784
Page 3 of 7
blue for the next channel(s) selected and the system will number it 2 and indicate it is the
"Current" channel. If multiple interfaces are displayed, the user must "double-click" on any
channel of the interface desired to make it "Current" to allow configuration changes or to
delete that interface.
16. Select the Close button to return to the FE1 FRS card display.
17. Select the Close button to return to the Chassis View window.
18. Repeat steps 1 through 17 for each card in the shelf.
Stop! You have completed this procedure.
NE Name: Cellworx1
NE Id: 20
NE AND CARD TYPE/
Card: FE1 FRS
SLOT INFORMATION.
Slot Number: 13
Port Number: 1
CARD REPRESENTATION
WITH ALARM
INDICATIONS.
CLICK ON ANY PORT TO
CONFIGURE INDIVIDUAL
FE1 PORTS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
Page 2-352
© 2000, ADC Telecommunications, Inc.
Cellworx Vision: Card View - E1 Frame Relay Service
Status:
Configuration:
Card Level
Administrative State:
Locked
FE1
Unlocked
FRS
Ring Selection:
Auto
Smoothing Constant:
Port Level
Administrative State:
Locked
ADC
Unlocked
Status
Line Build Out (LBO):
Active
APS
Line Coding:
Line Type:
Port
Circuit Identifier:
1
2
3 Loopback:
4
None
5
6
Facility Line
7
8
Terminal
Facility Payload
Apply Chassis View
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
Figure 784-1. FE1 FRS Card Configuration Window
X
Congestion Thresholds:
Ingress: 80 %
Egress: %
80
Ring 16 Ring 17
0.3
Transmit Timing Source:
Recieved
Local
120 Ohms
HDB3
E1 CRC-4 MF
default
Refresh Close
REPAINTS WINDOW CLOSES CARD LEVEL
TO REFLECT ANY VIEW AND RETURNS TO
CHANGES. SHELF LEVEL VIEW.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CARD LEVEL
CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
E1 PORT LEVEL
CONFIGURATION OPTIONS.
SELECT PORT FIRST.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
0026-011